Skylight MAXXAIR
Skylight 40x40 FIAMMA Vent
Skylight with integrated ventilation system and mosquito net.
Measurements: 400x400 (width x height).
For ceiling thicknesses of 30-50mm.
The manufacturer does not include the installation sheet metal screws.
For the installation, this butyl will be necessary to make the seal and prevent the entry of water (1 bottle for 40x40 skylights, perhaps 2 bottles if the ceiling is very irregular. At least 2 bottles for larger skylights). It will also be necessary 1 bottle of this Sika to make a thin outer profile and prevent the butyl from coming out through the contour (with 1 bottle you can make the contour of more than one skylight).
Thanks to the lowered design of the outer cover, the skylight is aerodynamic and quiet on the road; You don't need the spoiler.
In high-speed approval tests, noise and vibrations due to travel have been significantly reduced.
Thanks to its outer dome and its exclusive patented sealing gasket, greater impermeability is guaranteed, it prevents the infiltration of rain.
Made with high-quality materials stabilized against UV rays.
Can be installed on vehicles with a roof thickness of min 2.5 cm to max 5 cm. For ceilings with thicknesses up to a maximum of 8.5 cm, the supplementary extension kit is required.
The Vent White skylight does not require a darkening because it has a darkening dome.
It is the only one that can replace all skylights with opening dimensions from 36x36 cm to 42x42 cm, thanks to the wide reinforced frame.
Integrated mosquito net.
